The capacitive screen Drift failure of the approach oled module

Option One:
1, turn off the phone, remove the battery, the phone is allowed to stand for about five minutes
2, to find a USB cable, connect your phone
3, wash your hands, or handle wet (key steps, in order to better export to the electrostatic)I2C LCD display
4, your hands are wet state the same below the thumb of one hand contact with the metal part of the USB cable to the other end of the index finger to the ground for about 2 seconds (preliminary outgoing)
5 Open the back cover we can see a small piece of metal in the battery compartment next door, this is the phone to vibrate generator, commonly known as shock sub. As it is also directly connected to the main board of the phone, we can do the same, your hands are wet state the same below the thumb of one hand contact with the shock sub index finger to the ground for about 2 seconds.
Option Two:graphic LCD
Recent screen always drift, that is, the screen is inexplicable confusion and chaos, points are not allowed to, monitoring is not a so-called ROM, but for physical reasons, the following analysis.
With irons, I have solved the problem, and want to be able to help bring oil to encounter this problem.
Methods: HD2 battery removed, irons energized Pressing on the sheets, the sheets, the temperature should be moderate, remove the irons HD2 screen Flip on the heat sheets, screen cover hot (or temperature should be moderate, not repeat), and so forth about 5 times.